ExtremeSwitching (EXOS/Switch Engine) - Page 339 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Configure a list of allowed mac addresses on a wifi vlan using Summit switches. xos 16.2.4.5-patch1-8

Configure a list of allowed mac addresses on a wifi vlan using Summit switches. I want to use our 460 core switch to allow a list of macaddreses on a single vlan and have not been able to build an acl.

Configuration file is not downloading in extreme switch when auto provision is enabled through dhcp

I have configured the dhcp server with option 43 code 101 with a script name "boot_file.xsf". After factory reset whenever the switch is contacting the dhcp server, it receives only ip address but not the boot_file.xsf file from the tftp server which...

OSPF and MPLS route

I have created OSPF,MPLS and VPLS in our switch. One of my core swith iproute to our remote network. i found one path ospf route to remote netowrk but the mpls show have tow path to remote netowk. You can see the below information. I really apperica...

Are there any effects at the network if i configure the MLAG LACP address later?

I want to configure the mlag lacp mac adresse in a productiv network. Are there any effects at the network? I will configure the mac of the mlag peer 1 as the mlag lacp mac address.

port security

I have several x250e switches, recently i applied port security on them and i excluded some ports from it, i have been facing some issues and i need help, some PC's which i applied the port security on them on specific ports refuse to take an ip addr...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN