ExtremeSwitching (EXOS/Switch Engine) - Page 35 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! Should I power down entire stack to install VIM on master?

I have a stack of 5520's that I need to install a VIM into. If I install the VIM into the master should I power down the entire stack first if I don't want the master to change? Or would the master regain its' role as master automatically even if the...

Resolved! replacing the switch in the exos stack

hey, I have a stack of x440 g2 switches. recently one of the switches in the stack failed and was replaced via RMA.Switches are added to XMC from where they download NAC policies.I wonder if there is any procedure for replacing a switch in a stack?I ...

static route not redistributed into ospf

Hello,We have a problem with the redistribution of static route into the ospf process. We have the X-core when 4 ospf neighboring and in the configuration of the ospf we have enabled the redistribution of the static route.(vr VR-special) Coeur1-siteX...

Resolved! ONIE vs EXOS image on switches

Hi,Within our environment we have mostly Extreme x670-G2 & x460-G2, and one x440-G2 switches deployed. We also have two x465 PoE switches. The x465 switches use the ONIE image, and the x670's and x460s use an XOS image.My question is, can the x465 ru...

Resolved! How to configure muliple link connection between server and exos x590 switch ?

I have DataDomain server which need to be connected to network by 4x10Gb uplinks1st uplink has IP 192.168.1.10 in vlan 10 2nd uplink has IP 192.168.1.11 in vlan 103rd and 4th uplink is a failover and it has IP 192.168.1.12 in vlan 10thats the config ...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN