Hi,i'm trying to authenticate client via dot1x (EAP-TLS), RADIUS and netlogin.Our Radius Server is sending the VSA211 Attribute in the Accept Message but the EXOS Switch does not put the Client in the specified VLAN.Radius Attribut:Extreme-Netlogin-E...
Hi all,I am currently looking to replace existing cisco Core switches with two extreme switches core for redandancy (in stack) ,and replace existing cisco Access switches with the X435 models , and need to know best practice for configuring these Cor...
Today I try to configure x440-24p with trial license. But when I try to enable avb, it could not enable it and does not know that "avb" is.How could I enable avb in this switch, please give me advice.
We currently both connections from our ISP connected to one X460-48t switch (16.2.5.4 16.2.5.4-patch1-30)Ports are set to auto-negotiate.enable sharing 51 grouping 51-52 algorithm address-based L2 lacpWe are attempting to move the connections to two ...
Hi all,We have a 3-member stack of X440G2-48p-10G4 as our core. I have dual 10gb licenses enabled on all three members. The top member has one working 10gb SFP+ > fiber connection to our aggregate and one working 10gb rj45 connection to our newly ins...
