ExtremeSwitching (EXOS/Switch Engine) - Page 362 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Enable SummitStack-V on single switch?

In the past, our best practice was to enable stacking on everything (including single switches), allowing for future additions to the switch without having to suffer an outage and reconfiguration. It seems that when using 10Gb stacking on a 460-G2, u...

Extreme equivalent of trunking

I am having difficulty understanding how multiple vlans are transported between extreme switches (not stacked) and how they are physically cabled. With cisco i create two trunk ports directly connected between switches and pass multiple vlans between...

S Series VXLAN Best Practice

Hi Community We are in the process of configuring VXLAN's between three DC's. All three DC's utilizes S8 core switches (S180 Blades) Essentially allowing L2 vlans across the l3 underlay. The VXlan tunnels is all working as expected, using OSPF VXLA...

SFP module inventory

Is there a way to list installed SFP module model numbers from the CLI in EXOS 16.1.3.6 on a X670V-48x?

Problems with ezspantree.py script in a summit stack

I have a stack of two SummitX690 with firmware 22.4.1.4 and i want to use spanning tree for LoopProtection. To get new Vlans automatically add to stp "S0" i started the intended script "ezspantree.py" from Master. Unfortunately, this does not really ...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN