ExtremeSwitching (EXOS/Switch Engine) - Page 364 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Looping/Flooding issue + 1Gb/10Gb

Need recommendations on how to fix an issue with looping or flooding, likely due to 2 Ethernet Bridges on the same network. On a network we are currently setting up, we have a Cisco switch, 2 Extreme switches, and a Sophos UTM Ethernet Bridge (2 por...

switch dont see own S/N

Hello, all! X480-24x(10G4X).4 # sh version Switch : N/A(-11) N/A(-11) Rev 0.0 BootROM: 2.0.2.3 IMG: 16.2.2.4 Does anybody saw like that issue? What we can make before as upgrade from BootRom? Thank you!

inter-vlan routing between stacked and standalone x450e switches

I have an existing stack for the access layer and want to add a TOR switch. All x450e 12.6.2.12 configured vlans to match the stack removed all ports from default vlan(matching the old stack) enabled IP forwarding routes show the existing stack vlan ...

Getting Mac Addresses for Individual Nodes in a Stack - Python Script

Working on a python script to automate the commands I use to program some switches. I am trying to come up with a way to determine the MAC addresses of the switches in the stack and input those values into the following commands. - configure stacking...

Attempting to download Firmware from Downloads page will only allow a file with .txt extension not .xos for 16.2.4.5-patch1-8.

Attempting to download Firmware from Downloads page will only allow a file with .txt extension not .xos for 16.2.4.5-patch1-8, and I cannot figure out why. I am trying to download this to upgrade my BD-X8s as I belive this is the correct and newest s...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN