ExtremeSwitching (EXOS/Switch Engine) - Page 365 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

New Summit x440-g2-24p-10ge4 when powered on the FAN 4 runs at a constant 15000RPM

I got 2 new New Summit x440-g2-24p-10ge4 Switches 1st one, when powered on the FAN 4 runs at a constant 15000RPMThe rest of the Fans, are quiet at 2100RPM, while nothing is plugged in. Then the second one runs normally with normal fan speed but as...

ACL Mirror filtering across all ports?

I don't have backup traffic separated and have 2 port analyzers which I mirror and copy too. I want to filter using an ACL to block destination and port from reaching the mirror "to" ports. I believe my config is correct but since the sources span ...

PIM multicast and RP topology – need advice

I have PIM SM running on a dual core 8810 environment with edge user switches connected. The multicast source server used to terminate here but changed to a vm a few years back which moved to our TOR 10G switches, and these dc670’s connect dire...

Routing between Virtual Router on Same Switch

HiI’m having an issue with trying to route between two VRs on the same switch following the article (https://extremeportal.force.com/ExtrArticleDetail?an=000083084). The switch is on 16.2.4.5 patch 1-5.I have a virtual router called vr-SM which in it...

block port movement with MAC lockdown timeout

Hi All, we're using Summit x480 in an ISP environment to aggregate PPPoE traffic from smaller switches. We'd like to increase the network resiliency/security by prohibiting users from sending frames with Source MAC address that belongs to another use...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN