I would like to enable jumbo frames on two ports that will be connecting out to a brocade iscsi/nfs switches. I have two X690's as my cores and want to take brocade-10g-sw1 into ports 1:5 on X690-1 and X690-2, and take brocade-10g-sw2 into ports 1:6...
Please have a look at the ssh xmod package .zip file. There is no SummitX file included .
We recently enable SSH2 in our environment. I am able to SSH to Cisco switches without any issue but can not to any Extreme switch. I can login to them fine via teraterm/secureCRT but not via Ubuntu. I have a Ubuntu 14.04 machine. Here is what I a...
Now that fabric routing has caught my attention, I have a couple of questions (for 16.2+, I don't think I can run 21+ on my BD8806) 1) Does it work with secondary IP addresses (config snippet below)? configure vlan FOO ipaddress 10.0.0.252/24 config...
I'm using X430-8p, and i saw it does not support PTP. So I just want the switch to forward PTP to all port without change. my setup is HUB like configuration. with the following command: disable learning forward-packets port all all packets i sent ar...
