ExtremeSwitching (EXOS/Switch Engine) - Page 44 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Universal switches stacking templates XIQ

If I have a switch template configured for 3 switches and all is working as it should, how do I go about adding a 4th switch to the template without losing any of the configuration or is a whole new template needed ?

BPE VPEX Downgrade

Hi,I was staging some v.300 (about 100) and I noticed the some come with a version newer (1.4.0.23) that the one I need (1.4.0.21).I have auto-upgrade active on the CB.When the v.300 tries to upgrade it gives the following message: 09/27/2023 16:14:...

Resolved! X670G2 will not pass vlan traffic on a specific port

I inherited an x670g2 when I took this job. It is still on an older image (ExtremeXOS version 21.1.3.7) because I have too many other things to do.There were ~10 vlans defined already, all of them tagged on the 5 ports that support our separate buil...

About Tacacs authorization and authentication

Hello, We got demo Extreme network switch to our company for trying it. Actually we have all Cİsco switch and we manage them but we want to try extreme network switch. We worked commands of Tacacs by demo extreme switch and i logged in with my use...

ERPS Ring Switch - SFP Replacement Issues

Hello all,Recently we've been noticing some issue with our ERPS rings. When an SFP transceiver dies and we go to replace it without first rebooting the switch the ring appears to freak out a bit and cause some issues. I just wanted to know if this is...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN