ExtremeSwitching (EXOS/Switch Engine) - Page 458 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

How to schedule commands on X430 ?

Hello, I need periodically to disable PoE on some ports to reset CCTV cameras (eventually reboot the switch). I was able to write python script, which disables inline-power and then re-enables inline-power on interesting ports. However, X430 series ...

Can I run different types of MSM modules on one 8810 or 8806 machine?

Can I run different types of MSM modules on one 8810 or 8806 machine? For example, can I run MSM-48c and MSM-96 on one machine? Can I run MSM-48c and MSM-128 on one machine? Please answer me.

Need ACL to "auto conf" AVAYA Phone

I work on a very large campus, we have a lot of avaya phones. We have a voip vlan but our data vlan allow phones to work but it is better for us if all phones are in voip vlan. How can i make one ACL to auto configure switch port when it detect a p...

Newer version of code, reboot as master capable, asks for passphrase

Hello, in this example I have x460-48p switches. I noticed that with code 16.2.2.4 patch 1-3 (was the recommended code @ extreme at the time to address the poodle vulnerability), that if we have a switch in a stack that's not the master, when I issu...

Unable to Add L2

Hi, I am getting below messages in switch log. The release which i am using on BD8806 is 15.3.3.5 patch1-4 06/20/2017 09:15:20.27 Slot-5: Unable to Add L2 5:21 to s,G,v=a9beec5,e0000012,122 IPMC 95, unit 1 Entry not found 06/20/2017 09:15:02.01...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN