ExtremeSwitching (EXOS/Switch Engine) - Page 459 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Slot-1: RADIUS queue is full, check RADIUS configuration and/ or check RADIUS server.

Hi, we have a recurrent problem that the Netlogin Ports were disconnect. Slot-1: RADIUS queue is full, check RADIUS configuration and/ or check RADIUS server. How can i troubleshoot it? Thanks & Regards

Show Port with VLAN name instead of # of VLANs

I have EXOS 21.1. I would like to know if there is any way to get the output of show port to show all of the VLAN names instead of the number of VLANs on a port? If there is a single VLAN, it shows the name, but just knowing the number of VLANs ass...

X440-G2 will not forward mac address info , over shared 10gig port , to X670 running mlag.

I have a very basic configuration , from an X440-g2 licenced to use the 10Gig ports ( shared ) connected to 2 x 670 units running mlag , the x440 share is basic L2 and is static ( no lacp ) So the voice vlan is tagged at both the x440 and the 2 X67...

SG5201-0848-F6 spaning tre problem

Dear all i have a big problem, every seconds my topology changes i think i got spaning tree in some switches, can someone help me how to find it 2017-06-12 17:30:58 Local0 Notice 10.10.7.37 Jun 12 17:30:56 10.10.7.37 NOTICE: Topology c...

Enable Bootprelay on switch stack

I am unable to configure bootprelay on a switch stack running 21.1.1.4. I've got the configuration in there, but when I try to add a VLAN it gives me the following: ERROR[Lib_WiFi]: Can't enable BOOTP/DHCP client, as an IP address is configured. Co...

Top Kudoed Authors

User

Count

32

28

20

20

17

GTM-P2G8KFN