ExtremeSwitching (EXOS/Switch Engine) - Page 465 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Fiber Channel Over Ethernet(FCoE) support on x620

Is the Fiber Channel Over Ethernet(FCoE) supported on X620 platform. I have found only some old (2 years ago) answers when there wasn’t x620. I have also found some configuration which suggest that it is supported: http://documentation.extremen...

Maximum power consumption of 440-48p g2 vs 450-48p g2 Typo?

Looking at the spec sheets for x440 g2 and x450 g2 and the sheet lists a max power usage of a 440-48p g2 10ge as 961watts, a similar equipped x450 is listed as 228 watts. Can anyone from Extreme verify how the x440 spec sheet is figured? or if ...

Can I upgrade directly from IMG: 16.1.3.6 to 21.1.3 on the Summit x460-G2?

The title pretty much says it all. Can I upgrade directly from IMG: 16.1.3.6 to 21.1.3 on the Summit x460-G2? I want to make sure their aren't any interim upgrades or patches I need to do prior. I searched for the upgrade matrix to this but couldn...

VLAN to act like a HUB ( no mac learning )

XoS, I wish to have a vlan act like hub in the MAC learning sense, I just wish it to flood all traffic to all ports in that vlan. this is because this vlan is reciving some mirrored traffic from a another vendors equipment and I have a remote packet ...

Bad FCS in Sync messages

Dear Experts, The FCS of gPTP sync messages sent by Extreme Networks AVB Switch Summit x440-24t is marked in Wireshark as bad. I have the following firmware on my switch: * X440-24t.4 # show version Switch : 800471-00-12 1407N-41055 Rev 12.0 Bo...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN