ExtremeSwitching (EXOS/Switch Engine) - Page 464 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Can I upgrade directly from IMG: 16.1.3.6 to 21.1.3 on the Summit x460-G2?

The title pretty much says it all. Can I upgrade directly from IMG: 16.1.3.6 to 21.1.3 on the Summit x460-G2? I want to make sure their aren't any interim upgrades or patches I need to do prior. I searched for the upgrade matrix to this but couldn...

VLAN to act like a HUB ( no mac learning )

XoS, I wish to have a vlan act like hub in the MAC learning sense, I just wish it to flood all traffic to all ports in that vlan. this is because this vlan is reciving some mirrored traffic from a another vendors equipment and I have a remote packet ...

Bad FCS in Sync messages

Dear Experts, The FCS of gPTP sync messages sent by Extreme Networks AVB Switch Summit x440-24t is marked in Wireshark as bad. I have the following firmware on my switch: * X440-24t.4 # show version Switch : 800471-00-12 1407N-41055 Rev 12.0 Bo...

find ip address alloted to a particular mac address by switch extreme summit x460-24t

hi we have extreme networks summit x460-24t switch It is configured to allocate dhcp ip on vlan 101-400 of the type 172.16..<2-255> How can I look into its MAC address table for specific mac address ? example - my computer mac id is 6c-3b-e5-22-a9-19...

Changing bandwidth for AVB

Dear Experts, I have a Summit X440-24t AVB switch. I would like to know if there is a command, which could be used to change the bandwidth allocated to best effort traffic, so that it can be used by AVB. Is the standard setting 75% for AVB and 25% fr...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN