ExtremeSwitching (EXOS/Switch Engine) - Page 472 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

XOS 16.1.3.6 patch 1.8 affected by CVE-2014-3566 and CVE-2004-0230?

HI, Our customer uses XOS 16.1.3.6 patch 1.8 and during the test he found out that it may be affected by CVE-2014-3566 ( poodle ) and DOS CVE-2004-0230. Extreme page says about poodle that XOS version higher than 15.3 is patched , however SSL v3 is s...

EXOS Alternative of CISCO's VTP & IP Route adding method Required

I have to configure 14 access switches and 1 core switch for a customer, I am from Cisco background and want to learn VTP & IP route adding configurations. I got familiar on EXOS with aaa, DHCP and basic vlan configurations. I want to connect all 14 ...

How upgrade BD8810??

Hello. Do I upgrade a BD8810 like Summit Xos ??

How can I check edge ports to see if they are using edge-safeguard mode?

I am troubleshooting high CPU utilization on a x460 stack of 5 switches. One of the things that I came across is the hal process running sometimes fairly high, 16-20+%. So I saw a GTAC document on making sure that edge ports are running edge-safeguar...

X440 IPForwarding Not Working as Expected

I currently have and X440 at one of my sites that I am creating a new VLAN to add in some additional IP's. I successfully did this at another site and it worked like a charm, but this one seems to not be cooperating. I have both rip and ipforwardin...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN