ExtremeSwitching (EXOS/Switch Engine) - Page 488 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Port mirror to ESXi Virtual Machine

Hi, When configuring a port mirror to and from ESXi virtual machines for passive call recording we can see some mirrored traffic but cannot see any RTP traffic. The virtual machines are on separate VMware vSwtiches to force the traffic throug...

Rate limit flood counters

Hi all, I have set on my switches the rate limit for broadcast and multicast traffic to 1000 pps, i can see the Flood Rate Exceeded counter incrementing when i type the command "show port rate-limit flood refresh port-number", the configuration is a...

X450e-48p routing all multicast traffic to other switch

Hello, I've all my devices running on switch1 X450e-48p "ExtremeXOS version 12.5.4.5" switch. All of its ports are filled when i added another switch (switch 2) with same os and model behind switch 1 all the multicast traffic from switch 1 to switch...

XOS 16.1.3.6 patch 1.8 affected by CVE-2014-3566 and CVE-2004-0230?

HI, Our customer uses XOS 16.1.3.6 patch 1.8 and during the test he found out that it may be affected by CVE-2014-3566 ( poodle ) and DOS CVE-2004-0230. Extreme page says about poodle that XOS version higher than 15.3 is patched , however SSL v3 is s...

EXOS Alternative of CISCO's VTP & IP Route adding method Required

I have to configure 14 access switches and 1 core switch for a customer, I am from Cisco background and want to learn VTP & IP route adding configurations. I got familiar on EXOS with aaa, DHCP and basic vlan configurations. I want to connect all 14 ...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN