ExtremeSwitching (EXOS/Switch Engine) - Page 501 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Can I upgrade code using ZTP/dhcp code 43?

Can I upgrade code using dhcp code 43/ ztp? I have attempted this several times, I can get the switch to pull a config, or xsf, but it only pulls one file.I have found a TAC paper :https://extremeportal.force.com/ExtrArticleDetail?an=000078340but thi...

How to activate 1g SFP ports [29-32] on X460-G2-VIM-2X-B-1 v15.7.1.4

I have the ports enabled but they don't pass traffic when connected to a Junipr mx80. The previous engineers said they didn't use the 4 dedicated SFP ports because they couldn't get them to work either. I read somewhere that all the previous combo ...

LACP issues

I have some 450G2 switches that I can not get LACP LAG to work on. Core 670 switch is grouping ports 19 and 20. Sh lacp lag displays: Member Port Rx Sel Mux Actor Partner Port Priority State ...

LDP SC Entity Manager error

Hello, We have in lab two connected x460 (EXOS 16.1.4.2) switches with MPLS/LDP/VPLS between. When I enabled logging for event MPLS.LDP.InternalExcept I can see following messages: Feb 2 11:28:06 10.1.2.1 0x00002301-48 (0) LDP SC Entity Manager rec...

Can't do a firmware selection in Netsight

When I use the Firmware Upgrade Wizard in Netsight, I can't do a Frimware Selection. So I cann't map af device type to an image an upgrade the switch. I tested a couple devices (X440, X460) Version Netsight 7.0.9.4

Top Kudoed Authors

User

Count

32

28

20

20

17

GTM-P2G8KFN