I have a stack of x450e switches and I recently updated the XOS. When I do a Show Version it shows the two slots with different Rev #'s. Rev 10 is the correct version but slot 2 shows Rev 7. Also, the BootROM is different. Is that normal, and if not ...
Hi all, I have a problem running a bert test through a LAG LACP between a Huawei Switch and our Extreme X460G2. The problem is that the Extreme is not making load balancing, I suppose because the two Exfo Machines that run Bert test use the same port...
Where can I find information about the forwarding performance of the X770? The data sheet says up to 1904 Mpps. The product presentation from the partner web says 1440 Mpps. As far as I know it is based on the Broadcom Trident-II ASIC chipset which h...
I have two servers S1 and S2 connected to extreme BD switches Sw1 and Sw2 resp. We want to exchange the heartbeat from S1 to S2 via S1 - SW1 - SW2 - S2 over the multicast range. Both the servers are in same vlan. For accomplishing this if i disable ...
