ExtremeSwitching (EXOS/Switch Engine) - Page 563 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Power log messages

Below is a part of the logs form Slot-3 of our 3 node stack. Can anyone tell me what the error messages mean? I have the EMS catalog, but it only tells says that HAL.Card.Error is a serious error. 06/06/2016 08:07:36.84 Slot-3: Power usage ...

EXOS edge port status logging

Hello, In EXOS, is there any way to disable the logging of port up/down events on edge ports? Kind regards, Frank

show vlan and sorting

Hi, could be possible to make EXOS sort VLANS by VID? currently it sorts just by name and in case of hundreds vlans it's pretty annoying. show vlan | sort VID show vlan sort VID thank you -- antonio

This command will only take effect after save configuration and reboot

Hi Guys, Am connecting X670V 40G port with X770-32q 40G port. So i have configured the both the switch for 40 G but it is not coming up as 40 G. When i make port 97 as a 40 G it is giving below message, X770-32q # configure port 97 partition 1x40G...

Message pending to save configuration XOS

Someone can tell me how I can validate the settings that are pending on the switch to validate extreme, I mean the asterisk that appears before the name of the switch. This command does exactly cli-config-logging

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN