Hello,I've got a VMware Host with 2 x 10Gb going into 2 X670V switches (1 port in each) where I set them up as a MLAG (LACP). I've done this before and the port on the switches are usually the same, for example if it's port 10 on both switches I wou...
Hello,I have created a stack of 4 x440-48p g2 switches using the alternate stacking ports. The switch stack is in production and is working, but I realized afterwards that while wiring the stack up in the rack I did the stacking ports exactly opposit...
If I have multiple IP helpers on an Extreme EXOS switch, does it matter what order the IP helpers are added in, or does EXOS send the request, one-by-one, to ALL the IP helper servers configured one-by-one?
Hi SirsI have some questions for exos datasheet .What is the value of ARP table on the datasheet ?I just only watch IPv4 Hosts: - with min LPM IPv4 entries: 72K maxbut on the releasenote .it shows 74,000 as below picture
We have started adding our newly deployed Extreme 5420 EXOS switches into Solarwinds and gives basic info like connected ports, and vlans. What are the latest MiBs I should download? Q A: Location of Extreme Networks MIBs (Management Information Base...
