ExtremeSwitching (EXOS/Switch Engine) - Page 598 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

VMAN + ACL

Hello! Have scheme: Cisco (vman tag) -> (port24 vman tag) Extreme X440 ( port 23 vman untag) -> CheckPoint BUT CheckPoint work in passive mode (only receive traffic), also I can't see MAC of CheckPoint, so traffic don't go to port 23 (X440 don't kn...

connectivity problems

when i installed switch summit X460 ,and wires connected to ports, connection is not done and network is not working.....switch is in a flat network,...!

best practices for connecting unify voip ip phone on Enterasys C5 switches.

I would kindly to know what best practice follow to have more convergence and less network congestion for Voip phone connected on the C5 model switch.Currently traffic is well managed on my switch, as an example the ge.1.46 port as intended for PC an...

EXOS: X670V-48x Link up delay ??

We have 2x X670V-48x Stacks (with 2 Switches each) for redundant Servers connections. We use both hardware servers (windows 2008/2012) and virtual servers(vmware 5.5)). The redundancy mechanism is triggered by port Link status ! (All people know that...

Port cannot belong to VLAN and a VMAN at the same time.

Trying to configure QinQ solution between two extreme switches and im facing an issue when trying to make one of the ports untagged: | Error: 8: Port cannot belong to VLAN and a VMAN at the same time.| This port is not configured in any VLAN or VMA...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN