I have the following mlag configuration: I have created an mlag with a Juniper router with no problems. However, on the mlag 2 with the Dell server, port 2 on R1484 is "blocked on the vlan". Here is my config on R1484: ****************************...
Hi, i am quite new to ExtremeXOS, coming from the cisco world and I am not really getting the ACL/Policy configuration right. I read the ACL soulution guide but my question was not covered in there. Here is my question: If I want to apply ACL´s on...
I cant edit the ACL policy. i need add others IP´s direction Slot-2 SW.1 # sh policy Regla_acceso Policies at Policy Server: Policy: Regla_acceso entry bLoqueo_SSH { if match any { source-address 10.170.x.x/32 ; source-address 10.170.d.d/32 ...
Hello, I have an existing private vlan configuration that looks like this: vlan2 (untagged) +--------------port 1--------------+ | | | | +---port 2----------------port 3---+...
I have several x450e switches being used as access switches for phones, clients and a few Wifi APs. I would like to tighten security on these switches, I've done the standard RADIUS AAA, disabled telnet and http and only allow access by AD group via ...
