Are there any plausible reasons why STP is not possible on mLAG ports ?
For a current network project is would be very useful if i can use STP on core layer links (where 2 links are bonded with mLAG).
I have a telnet connection with my switch using a C++ program I've written. I then have to upload 300-350 .xsf scripts to the switch using tFTP. The problem I have is that uploading the scripts takes around 2 minutes. In other sections of my code I h...
Hi!
I wondering if it's possible to route incoming multicast from one VR to another VR in the same machine?
The reason is that I want to isolate a PIM domain for our IPTV customers from our core network. A simple solution would be to do a loop in t...
How do i config port redundant from one x670 to another x670 or in my case a juniper MX ?
is it enough to only config the extreme side with "configure port 1:1 redundant 1:2 link off" or do a have to config some redundancy on the other side to (MX)?
...
I need to know the below details for BDX8 and X670-G2:
BlackDiamond X8:
Max. Number of MAC Address per system?
Max. Number of IPv4 unicast routes?
Max. Number of IPv6 unicast routes?
Max. Number of ARP entries?
Max. Number of GRE tunnels?
Max. ...
