ExtremeSwitching (EXOS/Switch Engine) - Page 612 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

LACP up with receive lacp-bpdu

Hi, all! I heared that Cisco and Juniper switches have behavior (configure lacp) that ports working in stand-alone mode, but when receive lacp-bpdu then these ports became a LAG LACP. Can we do this in Summit X770? As I know in Summit LAG-LACP lin...

Can I stack X450-G2-48t-10GE4 switching using the 10GB ports on the front?

Can I stack X450-G2-48t-10GE4 switching using the 10GB ports on the front? For some reason I've got them plugged in (port 51 switch A - port 51 switch  via SFP+ but when I run configure stacking easy-setup it doesn't seem to pick up the second swit...

Can a new version of Recommended Code be issued as the existing one dated 31 Aug 2015 is cause for concern

Can a new version of Recommended Code be issued as the existing one dated 31 Aug 2015 is a cause for concern as its 6 months old.

Unconfigure EAPS - Step by step

Hi everybody, I need delete all EAPS configuration, please confirm: disable "Eaps_name_1" unconfigure "Eaps_name_1" primary port unconfigure "Eaps_name_1" secondary port delete "Eaps_name_1" that's right?? Thanks a lot!

Resolved! MLAG algorithm when connected to Juniper Switches.

I have a customer who has a core of Extreme , and Juniper edge . We seem to have an issue with Mlag. The config looks OK , only thing different to my configuration is that the ISC is in its own VR, I do not see an issue with that .. The problem tha...

Top Kudoed Authors

User

Count

33

29

22

20

17

GTM-P2G8KFN