ExtremeSwitching (EXOS/Switch Engine) - Page 619 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

x460 and x440 Not Passing the correct amount of power of PoE+

I've been running into a lot of problems with poe devices that are class4 and require PoE+. I have VoIP phones and Wireless AP (802.11AC) that aren't getting the correct amount of power. I have lldp enabled on the port with the AP (enable lldp por...

MPLS feature in trial license

We have 03 Summit X460 and we activated trial licenses. My Question: Has MPLS features activated when I activated trial licenses??? This is case urgently. Please, reply quickly help me. Thanks so much.

Ospf is not filling route table

I've been using a switch extreme x460 24pt in my lab, and i'm setting up OSPF, so when the ospf is running and up, the sw is not able to filled the route table with the routes received from the another router as if they doesn't exchange router table....

MAC move seen in Cisco switch connected to Extreme

Okey but I have other question and I have Cisco 3650 L3 end two xos summits 430 24t connecting trunk connection. Cisco L3 say flopping extreme switch connecting ports to vlan 1. What recommend give me about that. Note: This conversation was created...

Routing to a DHCP wan address

I am new to configuring extreme switches and have no idea if this is even possible, but here is what I would like to do. I have an extreme networks summit x460-24T What I would like to do is use it to route several vlan networks to a WAN/ internet n...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN