ExtremeSwitching (EXOS/Switch Engine) - Page 627 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

EXOS-VM doesn't boot after adding more NICs

Thanks Stephane. So I created the vm from the iso image and powered it on and it booted successfully. I then followed the install guide to add more nics, but now when I power on the vm it does not boot. I keep getting a watchdog warning message that ...

X460 and X440 stack locking up

I have a customer with 6 x440's and 1 x460 switches in a stack. The 460 is the master in slot 1. The problem is that the switches on occasion lockup. When this happens all the lights go solid and no traffic will pass. The fix is to reboot the sta...

MAC Flapping

I have twenty-five devices of eXtreme switch type Summit X450-24X DC with software version 15.3.1.4 patch1-38 , I'm facing problem with Flapping MAC.. my question, how do I Know Since when has been getting this Flapping?

MAC FILTER X450e

Hello everydoby, Actually, I have the Extreme x450e in my local network. I want to put the mac address filter system for limit the number of machines to connet in my LAN. After several research, I realize that some functionalities are absent. Spec...

summit X-450 switch rebooted suddenly without any log

i have summit X-450 switch and it rebooted suddenly and when i checked the log i didn't found any log related for reboot and also i found the below error. please can somebody help me in this issue RPOP1_SW_02.4 # show debug system-dump ========...

Top Kudoed Authors

User

Count

33

29

22

20

17

GTM-P2G8KFN