ExtremeSwitching (EXOS/Switch Engine) - Page 643 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

how to configure snmp trap to send only when linkup linkdown

how to configure snmp trap to send only when linkup linkdown. i don't want other alarm. only for linkup and linkdown. the switch will only send traps for linkUp and linkDown? System Type: X250e-24t Secondary ver: 12.1.3.14

Ovirt KVM, connection lost after VM migration within the cluster

Hello, Im setting up an Ovirt HA KVM environment with two stacked x440 Summit switches. My cluster has only two nodes, and I'm currently testing the live migration with a virtualized firewall (pfsense). The firewall has many virtual interfaces (wa...

LLDP not working for polycom, but working for Cisco phones on x460-G2

We have two phones, one Polycom VVW310 and a Cisco 7911 plugged into sequential ports on our stack. They are configured with the same LLDP configuration and the Cisco joins the proper voip network while the polycom does not. In the neighbor details...

License requirement for L3 tunneling XOS

Looking at GRE and layer 3 tunnels IPv4 over IPv4 for XOS. Are v4 over v4 tunnels supported on 460 and 670? Any license upgrades needed? Thank you

BGP community not being sent

not showing the /32 being advertise but the other /24 in seq 20 are being advertised whats missing for the /32 to be sent out ? configure bgp add network 31.91.192.143 255.255.255.255 create access-profile blackholes type ipaddress configure acc...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN