Extreme Networks

How to check SNMP traps sent status?

How to check SNMP traps sent status? i have configure port up/down trap. But i can't see any trap Sent to SNMP server? enable snmp traps port-up-down ports all Appreciate your help. Thanks. SW.30 # sh management Total Read Only Communities :...

Setting up SNMPv3 for PRTG

I'm trying to setup SNMPv3 on an x450e-24p for remote monitoring. I've been able to get snmpv2 working but I'd like to encrypt this traffic as it does not go though a VPN to my PRTG server. I've tried falling the guides on the GTAC but so far I've ...

Xos Firmware upgrade

Hi, We do most of our maintenance end of the year, and I going to upgrade the firmware on the switches, and Core, they are currently running Xos 12.5.4.5 and have a couple of new summits stack on 15.7.1.4, what will you recommend upgrade all of XoS t...

Need help understand what to do, my Core switch is spamming "Warning" recieved IGMPV1 query on Vlan ***?

Hi my Core switch recently started to display IGMPv1 warning messages and I have no idea on how to troubleshoot it. What I did do was conduct a nslookup on each IP that was populating on the IGMPv1 warning and they were coming from other IDF stacks. ...

VPLS learning unwanted MAC