ExtremeSwitching (EXOS/Switch Engine) - Page 650 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Jumbo Frame & IP MTU

Hi, If I'm using "configure ip-mtu vlan" for specifying MTU size for a specific VLAN, should I use "enable jumbo-frame ports" for each port associated to that VLAN? What is the relation with "configure jumbo-frame-size" if there are more than one t...

Max GRE tunnels supported in HW for 770, 670, 480 ?

Dear friends, Can you pls tell me how many GRE tunnels are supported in HW for the following switches? 770 - ? 670 - ? 480 - ? Also pls tell me what Broadcom chip is used as switching ASIC in the above switches. Thanks in advance ;-)

Card , MSM and Backplane contention.

I am trying to find out the contention rates between various modules in a BD8800 ie the difference between an 8 port 10 G card and a 24 port 10 Gig card ( 8900-10G24X-c ) and what dependencies on the specifics MSM's

what cards can an MSM48c support

I have a MSM48c that is currently running on verion 12.6 code , and has G48Ta / 10G4Xc cards installed , the end user is suggesting an 8900 spec card , I believe it is not supported ( MSM128 ) just want to see some documented evidence.

SNMP + LAG

Hi, all! After adding LAG on port from which was received VLAN monitoring (through SNMP) all counters became zero. Is this a limitation or bug? I mean that now I have information about port but can't have information about vlan. Thank you!

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN