ExtremeSwitching (EXOS/Switch Engine) - Page 655 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! x460 empty port blinking amber

I have an x460-48P that someone reported a port that went down. So I investigated and saw on the switch CLI that the port was enabled and ready, but showed nothing connected to it, even though there was a cable plugged in. So we disconnected the ca...

ELRP loop warnings over a 2-Tier MLAG architecture

We are having a problem in our Data centre where we have multiple 2-tier MLAG setup between the 2 CORE’s and pairs of distribution switches. Two 480s connected to each other via ISC, ports 51,52 (lag L3_L4 lacp - Master port 51). Two BDs co...

will the xgm3-2sf fit into a X450e?

Hi, we have four X450e in one stack (img 12.5.4.5) with two XGM2-2sf modules. Now we need additional 10GB-ports but is seems to be difficult to get new XGM2-2sf. Can we use XGM3-2sf instead?

VRRP stuck Init sharing LACP

Hi guys, VRRP stuck init if configuring the sharing port LACP. I tried disable sharing lacp, VRRP to be master. I have done 4 time update version extreme, why LACP issue VRRP init. SysName: X650-24x Current State: OPERATIONAL ...

X430-24p and summitlite-16.1.2.14.xos firmware problem

When upgrad to summitlite-16.1.2.14.xos then it can't reboot.

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN