ExtremeSwitching (EXOS/Switch Engine) - Page 656 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

what cards can an MSM48c support

I have a MSM48c that is currently running on verion 12.6 code , and has G48Ta / 10G4Xc cards installed , the end user is suggesting an 8900 spec card , I believe it is not supported ( MSM128 ) just want to see some documented evidence.

SNMP + LAG

Hi, all! After adding LAG on port from which was received VLAN monitoring (through SNMP) all counters became zero. Is this a limitation or bug? I mean that now I have information about port but can't have information about vlan. Thank you!

Python script triggered by UPM doesn't work properly

Hi everybody. I use x480 with 16.1.2. I have simple .py script like this. import pexpect import exsh exsh.clicmd ('create log message "Starting NSCBackup!"') for i in range(1,10): print(i) p = pexpect.spawn('/exos/bin/ssh -r 2 [email protected]....

Telnet admin password

It's possible to enable password auth when using telnet ? Thanks.

extreme x670 1/g sfp port not active

hi guys im new to extreme switches and im having a hard time configuring these switches heres the scenario: we have extreme x670v switches and using 1/g sfp tranceiver configure vlan "public" add ports 17-24 untagged enable ports 17-24 now to che...

Top Kudoed Authors

User

Count

33

29

22

20

17

GTM-P2G8KFN