ExtremeSwitching (EXOS/Switch Engine) - Page 660 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Black Diamond 8810 Fan Operational MIB?

I'm setting up our monitoring system (nagios) and trying to set up checks for the fans on our extreme 8810s. I've browsed through the mib file for the XOS I'm running (15.6.x.x) and the MIB should be: .1.3.6.1.4.1.1916.1.1.1.9.1.2 (this is an ind...

Resolved! x460 empty port blinking amber

I have an x460-48P that someone reported a port that went down. So I investigated and saw on the switch CLI that the port was enabled and ready, but showed nothing connected to it, even though there was a cable plugged in. So we disconnected the ca...

ELRP loop warnings over a 2-Tier MLAG architecture

We are having a problem in our Data centre where we have multiple 2-tier MLAG setup between the 2 CORE’s and pairs of distribution switches. Two 480s connected to each other via ISC, ports 51,52 (lag L3_L4 lacp - Master port 51). Two BDs co...

will the xgm3-2sf fit into a X450e?

Hi, we have four X450e in one stack (img 12.5.4.5) with two XGM2-2sf modules. Now we need additional 10GB-ports but is seems to be difficult to get new XGM2-2sf. Can we use XGM3-2sf instead?

VRRP stuck Init sharing LACP

Hi guys, VRRP stuck init if configuring the sharing port LACP. I tried disable sharing lacp, VRRP to be master. I have done 4 time update version extreme, why LACP issue VRRP init. SysName: X650-24x Current State: OPERATIONAL ...

Top Kudoed Authors

User

Count

33

29

22

20

17

GTM-P2G8KFN