ExtremeSwitching (EXOS/Switch Engine) - Page 682 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

How to add protocol ospf to Virtual Router of type VPN-VRF?

create vr "CAMPUS" type vpn-vrf vr "VR-Default" configure vr "CAMPUS" add protocol ospf Error: Protocol ospf cannot be configured on Virtual Router of type VPN VRF I need it to be vpn-vrf for our MP-BGP network and I need ospf there, no in default o...

How to copy one Switch configuration to another Switch with encrypted passwords

Hi, i need to copy the config from a LAN attached Switch to a local switch to replace it later? If i run the show conf to get the running config of the LAN attached switch in plaintext and paste it to the local(not LAN Attched device) it will not e...

autonegotiation problem on X440-48t-10G

autonegotiation problem on X440-48t-10G hi, my problem is the tuning speed and mode on ports for old pc , this client works fine on old switch A2H124-48, when I try to connected same client on new sw (X440-48t-10G), the connection not work!!! the le...

Strange behaviour while adding port to sharing group

Hello. I have a ring of 4 X670-48x running exos "15.5.3.4 patch1-6". Each switch are connected to its neighbour with 4x10gig sharing group links, and also to 4 cisco cat6509 with similar 4x10gig sharing group links - like this http://i.imgur.com/wC0...

Take a "snapshot" of the configuration before major change

Hi everyone! I have recently started working with Extreme moving from HP/Cisco which we still use. With Nexus I can checkpoint the configuration of the switch before a major change and possibly tell the switch that I lock myself out to apply the o...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN