ExtremeSwitching (EXOS/Switch Engine) - Page 684 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Trying to upgrade a x440 using the bootRom

Trying to upgrade the image from 15.3.1 to 16.1.1.4 through the bootRom but I keep getting a message saying that this is not a recovery image or it might be corrupted. I have tried different xos but with thw same results.

PoE scheduling UPM Profiles

Our organization wants to conserve energy by running PoE during business hours only and has business hours of 8am-5pm Mon-Fri. I understand how to build a UPM profile and timer to turn PoE off and on after and before business hours but I'm a little t...

"show config vlan" shows me some snmp config as well

This is on extremeos: why when I do "show config vlan" it shows me some snmp config as well ? weirdly it only seems to be disable snmp traps on ports ... Like so: code: Slot-1 es-x-k4a.1 # show config vlan # # Module vlan configuration. # c...

graphing vlan traffic

Hi, We would like to enable graphing for vlan traffic, we have over 3000 vlans on some switches. I just would like to know will this have any impact on the CPU on the switches. We are using X670-V, X460 and X440 within our network. Thanks Ian

Difference between VLAN service and VMAN service within a VPLS service?

When I create a VPLS service in the following way show configuration | inc IF5396_VPLS create vman "IF5396_VPLS" configure vman IF5396_VPLS description "VPLS vman for IF5397" configure vman IF5396_VPLS tag 10 configure vman IF5396_VPLS add ports 1...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN