ExtremeSwitching (EXOS/Switch Engine) - Page 691 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

icmp - TTL Exceeded mpls

Hello, colleagues. Help to solve following problem : There is a diagram of switching on Customers ->MX240--ldp lsp-->X670--ldp lsp-->X670--ldp lsp-->ldp lsp-->X670--ldp lsp-->MX480-->Internet All Extreme X670 - 15.7.2.9 - intermediate LSR MX240 -...

How big is the packet buffer on 670-g2 and 670-g2-72x ?

I know that in classic 670 is only 9 MB shared memory buffer, how it looks in G2 and G2-72x ?

ifInOctets and ifOutOctets counters not increasing for vlans

Hi,the traffic counters do not increase (all = 0) for all vlans I created on Summit X480-48t (EXOS 15.7.2.9)according to https://extremeportal.force.com/ExtrArticleDetail?an=000088473ifInUcastPkts and IfInNUcastPkts are not supported.But nothing abou...

ACL definition protocols/ports

Hi, It's possible to configure more than one protocol on the same line definition ? I tried "protocol tcp,udp" but doesn't work. When specifying a port, it's possible to add on the same line more than one ? I tried : destination-port 88; -> specify...

I would like to confirm that it is not possible to apply acl on egress interface on version IMG: 12.0.3.16 XGM2-1 (summit x450e-48p)

X450e-48p.18 # configure access-list printerpol ports 15 ? Execute the command ingress Acls applied to ingress I am applying this policy for a printer which is shared on the network (only selected IP addresses should be ab...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN