Hi everybody.
I have a strange message in log.
Process mcmgr pid 1487 died with signal 11Then switch immediately reboted.
What does this proceess responsible for?
I have a stack with 4 nodes.
2x X670V-48x
2x X460-24t
They are runnning 15.3.2.11
I'm seeing this error in the log
08/15/2015 18:48:55.70 Slot-1: shid_eeprom_read (67): data read failed at 1 out of 1
08/15/2015 18:48:55.70 Slot-1: i2c-1: shid_eep...
ExOS is summitX-15.3.1.4-patch1-31
Examples are from ACL Solutions Guide
What is wrong with this ACLs ?
* sw2.g50.kv.38 # edit policy l2pt-cdp-inentry cdp_pdu {
if {
ethernet-destination-address 01:00:0c??cc:cc ;
snap-type 0x2000 ;
} then {
r...
I'm trying to diagnose a problem with an AVB endpoint. I have a Summit X440-8t with the latest software build and the avb license pack. Three ports are connected: one to the endpoint module I'm trying to debug, one to a Windows PC running an applic...
Good morning everyone, I am a beginner in mpls and I have some doubts.
I need to create a VPLS with ip / 30 on each side, which would be the best way?
when configuring the IP on a vlan, it is not possible to configure the VPLS service.
what is ...
