ExtremeSwitching (EXOS/Switch Engine) - Page 696 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

ELRP + UPM = Number of UPM Events in Queue for execution

Hello! I want to execute UPM after every LOOP detect without Queue. Now, I see couple of loops , but UPM executes with Queue. 07/22/2015 16:58:08.98 [CLI:v3000:4] LOOP DETECTED : 3241 transmited, 177 received, ingress slot:port (3) egress slot:po...

CLI command history

Hi, when entering the command history with arrow keys, I find that the CLI never returns back to a blank line but it sticks to the last command issued. It's annoying because to issue a new command you must first delete that command displayed. than...

log skips days

We have a x460-48p running 15.5.2.9 v1552b9-patch1-5. The switch rebooted after a System Failure. After it rebooted we looked at the log on the switch and it doesn't show any messages in the log for 6 days. Here is a little cut and paste. 7/28/...

Replacing MSM: Software incompatible

We replaced an MSM on a BD8810. When we first installed it, It upgraded firmware and then came online. We had though that it had just installed new firmware to the new card and it was working as expected. However, now I have noticed that it actually ...

Slot-1: i2c-1: sylvester_plugincard_temp:3749 I/O failed,

I have a X670V-48t running 15.3.1.4 patch1-33 I am receiving the following warnings repeatedly in the log: 07/27/2015 11:19:31.20 Slot-1: i2c-1: sylvester_plugincard_temp:3749 I/O failed, addr 0x0048 rd/wr 1 cmd 0 proto 3, rc 145 07/27/2015 11:19...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN