ExtremeSwitching (EXOS/Switch Engine) - Page 698 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

OEM 10Gbps Optics - Safe or not?

I'm wondering if anyone has any experience using OEM 10Gbps SFP+ optics? I'm guessing that any link issues will be met with a, "You aren't using a supported optic" response by support. Other than that, has anyone actually had any issues with compat...

How do I configure an access list to allow only one IP through ingress port?

entry iprule1 {if { source-address 10.1.2.246/32 ; } then { permit ; } else { deny ; } } I am getting error: Error: ACL install operation failed - conflicting actions And where is "Extreme Networks Policy Manager" cant find it on extremenewtwork...

Please help. I need to create a snmp community with access to only one subnet and deny others?

Please check if this is correct:- Can I apply the following policy to the snmp community :- entry iprule1 { if { source-address 10.1.2.0/24 ; } then { permit ; } } entry iprule2 { if { } then { deny; } } Or is there a simpler way?????

vlan routing on X440

I have followed the article in the GTAC on how to enable inter vlan routing and I am unable to ping the either PC in either vlan. From PC A on vlan10 I can ping the gateway and the other gateway of vlan20, and from PC B on vlan20 I can ping the gate...

Routing from vlans to external router

As a follow up to my last post on inter-vlan routing, which is now working, both PCs on separate vlans cannot get to the internet. I tried 'configure iproute add default gateway and that did not work. If the default gateway of the PC is the VLAN how...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN