ExtremeSwitching (EXOS/Switch Engine) - Page 700 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

CLI command history

Hi, when entering the command history with arrow keys, I find that the CLI never returns back to a blank line but it sticks to the last command issued. It's annoying because to issue a new command you must first delete that command displayed. than...

log skips days

We have a x460-48p running 15.5.2.9 v1552b9-patch1-5. The switch rebooted after a System Failure. After it rebooted we looked at the log on the switch and it doesn't show any messages in the log for 6 days. Here is a little cut and paste. 7/28/...

Replacing MSM: Software incompatible

We replaced an MSM on a BD8810. When we first installed it, It upgraded firmware and then came online. We had though that it had just installed new firmware to the new card and it was working as expected. However, now I have noticed that it actually ...

Slot-1: i2c-1: sylvester_plugincard_temp:3749 I/O failed,

I have a X670V-48t running 15.3.1.4 patch1-33 I am receiving the following warnings repeatedly in the log: 07/27/2015 11:19:31.20 Slot-1: i2c-1: sylvester_plugincard_temp:3749 I/O failed, addr 0x0048 rd/wr 1 cmd 0 proto 3, rc 145 07/27/2015 11:19...

Limiting inbound BGP routes

Hello, I'm multihomed with several upstream providers over two 480s and get full BGP routes from them. Both 480s are connected to two "core" 8806s that then connect to a bunch of 460s. The 8806s are the default routers for all of our customers' publ...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN