ExtremeSwitching (EXOS/Switch Engine) - Page 706 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

LACP Counters, big difference between RX-Ok

we have several LACP Lag's configured on our X670 Switches. In the Output of the command #Show lacp Counters i found something interesting on the ports 5+6 i've got a not so many "RX ok" then on the other configured Lag's, the difference is in fact ...

Securing SSH2 daemon on XOS 15.6.1.4 - disable MD5 or 96-bit MAC algorithms

Hi, our security team is reported that XOS sshd is using either MD5 or 96-bit MAC algorithms, which are considered weak. Is there any way to configure the MAC algorithm which is used by SSH daemon on XOS? Our devices are (x670/440).

show log chronological

Hi, is it possible to set show log to always display entries in chronological order? I mean without appending each time 'chronological' to the command. thank you -- antonio

High CPU utilization wanring due to cli process in BD Switch

07/06/2015 02:23:31.40 MSM-A: CPU utilization monitor: process cli consumes 68 %% CPU Can someone help here to solve this problem or any short command .. i had checked TOP command also but not able to see any process going above 2% at present .....

DHCP

Have several VLANs setup on a Extrem 460g2 switch. Enabled DHCP relay agent on the switch for the following VLANs. Have a Windows 2012 server that I want to use as my DHCP server. Installed and enabled DHCP relay agent on the server. Create...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN