ExtremeSwitching (EXOS/Switch Engine) - Page 705 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

trunking black diamond 8810 and cisco 3750

hii techies... i have one black diamond 8810.. i wanna do trunking with cisco 3750 . please help. As in cisco i can juz creat a trunk port and give it a mgmt ip. viz switchport mode trun and switch trunk native vlan 100 and will give a ip to inter...

SNMP get vlan information

Hi everybody! I'd like to get some information about vlans on ports. Unfortunately, XOS doesn't respond to standard dot1qVLanStaticTable OID (.1.3.6.1.2.1.17.7.1.4.3). So, I've decided to use extremePortVlanInfoTable private OID. But I can't find ta...

Help required for EXOS 15.6 source ip based PBR

Running XOS 15.6 on X770 and configured ACL to match on source-address and ACL matches, but the actions i tried e.g. "redirect" and "redirect-name" to change nexthop does not work but instead the switch continues to use the default routing table. Any...

IP MTU on EX switch

Hi everybody, I want my switch to pass IP packet of 2000 bytes it generated. Here is my config: create vlan NEE config vlan NEE tag 45 config vlan NEE ipaddress 199.199.199.1 255.255.255.252 configure ip-mtu 2000 Vlan NEE All ports are enabled ...

How to disable ntp in ExtremeXOS.

how to disable ntp in ExtremeXOS? I tried some commands as "disable ntp" but many times it through this error: %% Invalid input detected at '^' marker. Help me, please. Thanks.

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN