ExtremeSwitching (EXOS/Switch Engine) - Page 714 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

XOS 15.7.1.4 mvrp between BD8806 and SUMMIT X460-G2-48t-10GE4

Hi, just testing mvrp between 3 SUMMIT X460-G2-48t-10GE4 configured as a stack and 1 BD8806 MSM-48c 10G8Xc The Summit X stack is connected to BD8806 via a 10GE port. On the BD8806: create vlan test configure test tag 500 configure vlan test add p...

Active/Active VRRP with Mlag

I have two BD 8810's. I have mlag and vrrp working well. It is currently in the standard active/backup. I have all my vlans on vrid 1 and the Virtual IP and the master are Core 1. We set the VIP to the IP of Core 1. My question is to get Active/Activ...

XOS 15.7.1.4 show iproute

Hi, under 'Ori' there is #d (directly connected, I guess), but there is not 'd' in the table below platform: BD8806 MSM-48c show iproute #s Default Route 172.31.150.254 1 UG---S-um--f- Default 0d:1h:40m:2s #d 172.31.150.0/24 17...

set maclock 11-11-11-11-11-11 ge.1.1 enable

Hello, I wonder that can we do this command in new Extreme Networks Switch. Is there any way to set the mac on given port. Thanks Best Regards

ExOS VM and GNS3

Hello Guys, I'm trying to set up a lab at the GNS3, so, i'm being able to configure the ExtremoXOS VM under GNS3, but when i set up a vpls between them, and connect a PC or any router under GNS3, i can't ping the host in other side. The questions is...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN