Hi everyone, I'm using x460 and x450, so, i have enabled the stp/rstp on the switch to guard against loop network and mainly access ports, where i need avoid the maximun security level about loop that can be happening in the customer network. So,...
Hello community, I'm getting some log messages on our X670, it's something wrong in fan module or temperature sensor. This message appears every minute: 04/08/2015 10:26:52.01 Switch: Fan module 1 installed (X670-48x, P/N: 800400-00-11, S/N: 1340N...
Hi, all! Is any body has a problem - that USB-flash can't mount? USB mount normally only after reboot switch. Note: This conversation was created from a reply on: Failed to download image - Error: File could not be unwrapped.
So I had this network which topology is this: And I had OSPF up and running and everything seemed to be well. I fired up a windows 7 32-bit host machine under Switch1, enabled port 2, added vlan to it as untagged and suddenly Switch1 gave this err...
I've experience a problem where i have a topology networking in ring and all switch is set up mpls with lacp. So the problem is the lacp doesn't work in mode load balance with mpls, other words, when i put 2 ports (port 1 and port 2)interface in mo...
