New, Summit 460 G2 running 15.6.0b12. A show config has the normal, empty config with the exception of the following section:
#
# Module netTools configuration.
#
enable dhcp vlan Default
This has not been present in the configs on any of the othe...
Not able to ping new vlan default gateway
Name VID Protocol Addr Flags Proto Ports Virtual Active router /Total
---------------------------------------------------------------------------------...
Hi everybody,
I need to know If there is any CLI command (or NetSight Applications tool) I can use to check a Securestack C3 switch for HW issues.
I tried the various "show port ..." commands, but they only show if ports are admin and operationally ...
