how to pass ENA EW0-200 ,
please i want to write ena exam, i dont know the steps, and what is the exam code,bcs when i enter for online exam,they ask me for the code, thank you so much
Forum Posts
translate untagged vlan on cep-port
Hello, I configured a cep-port for terminating a vman on a customer switch. The traffic from the customer comes unttaged and should run into vlan100 into the vman. Therefore I've done the following: configure vman vman1 add ports 6 untagged port-cv...
Clear flow "delta" action
Hi everybody. I have trouble again... I'd like to create an OpenFlow rule which sends the syslog message when broadcast rate reaches 1000 pps in some VLANs. I've applied this rule to VLAN and disabled all ports on the switch. But I see those syslog ...
x670v ports wont up using extreme transcievers
Hi Experts, Is there something I'm missing? I have enabled the port the I need to use, and attached it to a x670v going to a supermicro server with an Extreme sfp+ module on one end, and ano there transceiver on the other end, I have turned enabled ...
Switch Hang down - All port are disable
Does anyone know what the different settings mean on the Enterasys Captive portal page? I am trying to creat a Guest SSID with authentication, but not sure what some of the settings mean? What is "Bridge Traffic Locally at HWC" mean? What "Interface ...
