ExtremeSwitching (EXOS/Switch Engine) - Page 749 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

X440-24t Temperatur Error

Hello, we got a strange Temperatur Problem with an X440-24t: The switch displays two different temperatures! Logfile: 10/30/2014 13:27:22.37 Environment warning reported. Setting Environment LED color to Amber10/30/2014 13:27:22.37 Switch: Temp...

Switch is ignoring enable group sharing and it's causing a loopback

Hi everyone I have an issue with one of my stacks where it's acting like a loopback issue. For example, in this case I have ports 1:41 and 14:2 on switch 1 grouped and Uplinked to ports 1:53, 6:53 which are also grouped on switch 2. Now this configu...

Active IP VLANS & Routing Oh My...

I have a question in regards to the VR-Default and active IP4 VLANS. I created two new VLAN's according to the documentation and assigned them IP's but they show up as inactive. What am I missing. I would just like to route traffic between the VL...

X670-48x Ports - All LED went off

Hello all, I currently have to X670-48x stacked with XOS 15.3.1.4 patch1-10 and recently we had an issue where most of the active LEDs went off and all ports went down at the same time. after restarting the switch, nothing changed all the ports rema...

I don't get ports statistics by SNMP

I use command ports monitoring for get statictic vlan and port Example: configure ports 22 monitor vlan perring_to_sion configure ports 23 monitor vlan cloud-ix configure ports 23 monitor vlan data-ix configure ports 23 monitor vlan dtel-ix configur...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN