ExtremeSwitching (EXOS/Switch Engine) - Page 765 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

STP: Changing the bridge priority of a switch

If I change the STP bridge priority of a switch to a lower value (from 20480 to 16384), using the command: config stpd s0 priority 16384, will that change take effect immediately? If not, do I need to restart stpd? disable stpd s0 enable stpd s0. ...

basic routing question

I have VLAN configured with no routing on my Extreme network core (very basic network). the Vlans are routed on the gateway which is our UTM appliance (handles WAN/ VPN public traffic etc). I would like to create a new set of VLANs on the core with ...

Notification for new XOS Releases

Can someone tell me where or how i have to configure/register for notifications, that a got a mail or notification when a new xos firmware (new release & patch release) is available? For Enterasys products this works more or less good, but for XOS I ...

connectivity to a switch (X440)

Hi, I have a strange problem and wondered if someone can shed some light on this for me. We have x440-48p which in-situ and 'working'. I am trying to allocate a couple of ports to a particular VLan. When I try to connect directly to the switch us...

No associated STP port for STP Domain tag 1 (Rate-limited)

Hi, We are getting the below error on our X670-V switch. Port 1:33 is a sharing port "1:33 and 1:34" Port=1:33: No associated STP port for STP Domain tag 1 (Rate-limited) If we look at STP I can see 1:33, 1:33* 802.1D FORWARDING 18000 eRppad----...

Top Kudoed Authors

User

Count

33

29

23

20

17

GTM-P2G8KFN