ExtremeSwitching (EXOS/Switch Engine) - Page 774 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Extreme network switch Simulator

Create Date: Jun 14 2013 10:10PM hello all, my organisation is in the process of finishing the configuration of our new extreme core infrastructure which includes x670 core switches, x460 distribution switches, and x440 switches for ip telephony. ...

Kernel Card Warning

Dear All, recently we found that almost for one week long we are getting the following messages in logs for the stack of two X670V-48x for every 3 seconds: 07/28/2014 19:17:21.55 Slot-2: i2c-1: sylvester_plugincard_temp:1879 I/O failed, addr 0x004...

Stacking X-250 Family with X440

Hi all, I wish to know if a x440 is supported in a stack with four x250 switches. Would i have to upgrade my x250 stacking? Thanks.

How to monitor the unknown unicast frames?

Hi everybody! I have to configure the rate-limit on the ports. conf ports 1 rate-limit flood unknown-destmac But I don't actually know the rate limit. How much unknown unicast frames should be in our network. Can I log or monitor this kind of traf...

How to debug an OSPF adjacency problem?

I have a Summit 670V switch with a /30 uplink to a Cisco router. OSPF is configured but a neighbor adjacency is not being formed. I am using MD5 authentication with a key on both sides of the link. I'm familiar with using Cisco's debug commands bu...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN