Hi everybody! I have to configure the rate-limit on the ports. conf ports 1 rate-limit flood unknown-destmac But I don't actually know the rate limit. How much unknown unicast frames should be in our network. Can I log or monitor this kind of traf...
I have a Summit 670V switch with a /30 uplink to a Cisco router. OSPF is configured but a neighbor adjacency is not being formed. I am using MD5 authentication with a key on both sides of the link. I'm familiar with using Cisco's debug commands bu...
Hi everybody. I'd like to translate one VLAN tags to another. For instance, I have the similar scheme. Is that configuration enough? And what VLANs (401-413 or 71-83) I should add to ISC link between x670 switches? First and second x670 enable m...
We have 4 x450 switches stacked here. I would just want to ask for the procedure on how to do xos upgrade for switches in stacked configuration? Do I need to break the stack, upgrade each node then rebuild the stack? Or can I upgrade all those 4 swit...
A previous network engineer setup OSPF throughout our network, he has since left. I just finished & passed my CISCO CCENT, so while I’ve just finished learning and practicing OSPF I’m still inexperienced. I’m tasked with setting up a new office, whi...
