Stacking X-250 Family with X440
Hi all, I wish to know if a x440 is supported in a stack with four x250 switches. Would i have to upgrade my x250 stacking? Thanks.
Forum Posts
How to monitor the unknown unicast frames?
Hi everybody! I have to configure the rate-limit on the ports. conf ports 1 rate-limit flood unknown-destmac But I don't actually know the rate limit. How much unknown unicast frames should be in our network. Can I log or monitor this kind of traf...
How to debug an OSPF adjacency problem?
I have a Summit 670V switch with a /30 uplink to a Cisco router. OSPF is configured but a neighbor adjacency is not being formed. I am using MD5 authentication with a key on both sides of the link. I'm familiar with using Cisco's debug commands bu...
Vlan translation in MLAG switches
Hi everybody. I'd like to translate one VLAN tags to another. For instance, I have the similar scheme. Is that configuration enough? And what VLANs (401-413 or 71-83) I should add to ISC link between x670 switches? First and second x670 enable m...
How to software upgrade 4 x450 in a stacked config
We have 4 x450 switches stacked here. I would just want to ask for the procedure on how to do xos upgrade for switches in stacked configuration? Do I need to break the stack, upgrade each node then rebuild the stack? Or can I upgrade all those 4 swit...
