ExtremeSwitching (EXOS/Switch Engine) - Page 786 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

routing via interface on extreme 670, xos 15.3

Hi, On some linux server i have routing via interface: ifconfig eth0 10.10.20.1/24 route add -net 10.10.10.0/24 dev eth0 I'd like do the same on extreme 670, but i can't something like this: configure vlan999 ipaddress 10.10.20.1/24 configure ipr...

MLAG/ISC/Teaming-Bonding

Hello, we have Windows servers with that nifty Broadcom "Teaming" option as well as Linux CentOS servers with "Bonding" - and of course VMWare hosts with their virtual "switches". Now to set them up properly for both speed aggregation and/or redunda...

Port flap on LACP load sharing group causes permanent network loop

Had a neat issue that killed our network the other day. Tracked it down to a flaky port on a single switch that was connected to a stack with LACP. I was able to reproduce the problem. Take a stack and LACP load share one port from each stack memb...

Process system 99%

Hi I´m having this problem with some summit switches I have, once in a while I lose conection with my switch this happens once or twice per day, I notice this because of my monitoring tool. I have been checking my switch and executing the command s...

DHCPv6 Prefix Delegation?

Is there any way to handle prefix delegation to end-user devices in extreme? Im familiar with DHCPv6 prefix delegation to hand out subnets to NAT routers, but dont see this functionality in extreme.

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN