ExtremeSwitching (EXOS/Switch Engine) - Page 785 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

disable (remove) license from x460

I have an x460 that came as an Edge license, but I purchased a Core license and have enabled the purchased license. I want to RMA the switch because it doesn't work right and we've only had it for 2 months. The port link light on the switch don't l...

routing via interface on extreme 670, xos 15.3

Hi, On some linux server i have routing via interface: ifconfig eth0 10.10.20.1/24 route add -net 10.10.10.0/24 dev eth0 I'd like do the same on extreme 670, but i can't something like this: configure vlan999 ipaddress 10.10.20.1/24 configure ipr...

MLAG/ISC/Teaming-Bonding

Hello, we have Windows servers with that nifty Broadcom "Teaming" option as well as Linux CentOS servers with "Bonding" - and of course VMWare hosts with their virtual "switches". Now to set them up properly for both speed aggregation and/or redunda...

Port flap on LACP load sharing group causes permanent network loop

Had a neat issue that killed our network the other day. Tracked it down to a flaky port on a single switch that was connected to a stack with LACP. I was able to reproduce the problem. Take a stack and LACP load share one port from each stack memb...

Process system 99%

Hi I´m having this problem with some summit switches I have, once in a while I lose conection with my switch this happens once or twice per day, I notice this because of my monitoring tool. I have been checking my switch and executing the command s...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN